Tuesday, January 31, 2017

Beacon Hill Tower Roof (Step 1)


Today I put a second coat of paint on the roof shingles. They look much better and are probably ready for installation. I think I'll hold off on that until I have the four windows built and ready to install so the roof units can be dry fit before gluing.

Meanwhile, the copper foil arrived from Delphi. It's meant for copper-foiled stained glass work, but it's a good weight and adhesive backed, in 12" x 12" squares. Perfect for what I want to do. The first step is to cover the ribs. I cut a pattern and got two of the ribs covered tonight.

The black roof panel will also be copper. I'm going to make a template so I can apply the copper while it is flat on the worktable to avoid creasing. I still have to work out what to use to create the standing seams. I'm leaning toward string glued in place. A little experimentation is in order.


3 comments:

  1. I am very excited to see the finished roof and how the exterior turns out.

    ReplyDelete
  2. Me gusta como queda!!!
    Besos.

    ReplyDelete